STANDARD PRESSURE TRANSDUCER
TESTED CERAMIC TECHNOLOGY
AFRISO DMU01
- No mechanical aging of the measuring cell
- Without transmission fluid
- Versions for gauge pressure and absolute pressure
STANDARD PRESSURE TRANSDUCER
TESTED CERAMIC TECHNOLOGY
AFRISO DMU01
- No mechanical aging of the measuring cell
- Without transmission fluid
- Versions for gauge pressure and absolute pressure
Description
PRESSURE TRANSDUCER CERAMIC TECHNOLOGY – AFRISO DMU01
pressure transducers convert physical pressure into an electrical signal proportional to pressure. DMU 01 is equipped with a piezoresistive thick film ceramic measuring cell. For electronic pressure measurement in industrial applications (such as hydraulic and pneumatic applications, as well as mechanical and plant engineering).
Technical characteristics
PRESSURE TRANSDUCER CERAMIC TECHNOLOGY – AFRISO DMU01
Accuracy performance:
Deviation of the characteristic curve according to IEC 60770 – limit point calibration (non-linearity, hysteresis, repeatability) limit point calibration (non-linearity, hysteresis, repeatability).
- -1/0 bar < ± 1 % FSO
- < ± 0.5 % FSO
Materials:
- Housing: 304 stainless steel
- Pressure connection: 304 stainless steel
- Diaphragm: Ceramic (Al2O3 96%)
- Sealing: FKM (Viton)
- FKM (Viton)
Voltage supply:
DC 8 – 32V
Overpressure protection:
- At least 2 x FS
- 250 bar: 400 bar
- 400 bar: 650 bar
Degree of protection:
IP 65 ( EN 60529)
Working temperature range:
- Medium: -25 / + 125 ° C
- Environment: -25 / + 85 ° C
- Stored: -40 / + 85 ° C