WELDING / THREADED BALL VALVE
1 PIECE, REDUCED BORE
KITZ SB80
Range: 1/4 “to 2”
Pressure: # 800
Non-ejectable antistatic shaft
WELDING / THREADED BALL VALVE
1 PIECE, REDUCED STEP
KITZ SB80
Range: 1/4 “to 2”
Pressure: # 800
Non-ejectable antistatic shaft
Description
BALL VALVE WITH WELDABLE OR THREADED ENDS – KITZ ISO SB80
The “ISO” SB80 KITZ is our 1-piece reduced bore ball valve, stainless steel or carbon body. The range is from 1/4 “to 2” (inches). The ends can be BSP, NPT or BW / SW. Its pressure range: # 800. Indicated for conducting aqueous media, oil and gas.
Features
BALL VALVE WITH WELDING OR THREADED ENDS – KITZ ISO SB80
Design:
Según EN 1983/B16.34
Length:
EN 558
Advantages:
- Antistatic device
- Blowout proof stem
- Fireproof
- High performance PTFE seats
Endings:
- NPT thread: ANSI B1.20.1
- BSP thread: ISO228
- BW (one end only): Nipple Sch 40-80 (Ansi B16.25), Bolted (other end)
- SW: ASME B16.5
Operable with:
Handle, reducer, pneumatic actuator or electric actuator.
Seat temperature range:
Rubber: 165 ° F / 74 ° C
Buna-N: 194 ° F / 90 ° C
EPDM: 248 ° F / 150 ° C
Viton: 392 ° F / 200 ° C
Buna-N: 194 ° F / 90 ° C
EPDM: 248 ° F / 150 ° C
Viton: 392 ° F / 200 ° C
Certifications:
CE certificate according to PED 2014/68 / EU ATEX certificate
Medium:
Water, oil, gas and acids.
Optional:
- Antistatic device
- ISO 5211 direct mount PAD