SHOCK DISC FLOW METER
DIN / ANSI
TECFLUID DP
Range: DN40 – DN500
Accuracy: ± 2,5% vfe – special 1,6% vfe
Maximum temperature: 300ºC.
SHOCK DISC FLOW METER
DIN / ANSI
TECFLUID DP
Range: DN40 – DN500
Accuracy: ± 2,5% vfe – special 1,6% vfe
Maximum temperature: 300ºC.
Principle of operation
FLOW METER ROBUST FOR LIQUIDS OR GASES – TECFLUID DP
A shock disk flowmeter is based on the indirect measurement of the force exerted on a suspended disk in the path where a fluid circulates at a certain speed . The disc is supported by an axis perpendicular to the direction of the fluid, so the force applied by it affects the rotation of said axis . In turn, a spring attached to the shaft opposes its rotation. The force applied on the spring is equal to the force exerted by the fluid , obtaining a balance point of the angle of rotation of the disk that is equivalent to a flow rate.
Features
FLOW METER ROBUST FOR LIQUIDS OR GASES – TECFLUID DP
Accuracy:
± 2,5% v.f.e – special 1,6% v.f.e
Materials:
Parts in contact with the fluid in AISI 316L, steel, hastelloy C
Connection types:
Wafer, brida
Sizes and flow rates:
- From DN40 to DN500
- From 0.8 to 1600 m3 / h H2O 20ºC
Maximum temperature:
- 130ºC (standard DP65 model)
- 300ºC (model DP65 / AISI316L configured for high temperature. 400ºC with thermal separator.
Maximum pressure:
Depending on size, PN40 to PN16
Accessories:
- Automation
- Transmitter / totalizer (optional ATEX / IECEx certification and HART protocol)
- Thermal separator
- Indicator box in AISI 316L or in PP
Applications
FLOW METER ROBUST FOR LIQUIDS OR GASES – TECFLUID DP
- Water treatment and distribution
- Pharmaceutical, chemical and paper industry
- Heating and cooling circuits
- Pool waters
- Fire fighting installations
- Automotive (cutting oil, paint lines and cooling systems)
- Power plants and lubrication circuits