Indicator ultrasonic transmitter for solids and liquids - TECFLUID LU
+34 93 587 22 22 | WhatsApp : +34 628 512 590 grm@grmindustrial.es
Index » Productos » Instrumentation » Level » Transmitter » Digital level displayers » Indicator ultrasonic transmitter for solids and liquids

INDICATOR / ULTRASONIC TRANSMITTER FOR SOLIDS AND LIQUIDS

EXCELLENT FOR CORROSIVE MEDIA

TECFLUID LU

Range: 3/4 “to 2 1/2”

Accuracy: ± 2 mm (between 0.3 and 2 m )

Maximum temperature: 250ºC.

Indicator ultrasonic transmitter for solids and liquids

ULTRASONIC INDICATOR / TRANSMITTER FOR SOLIDS AND LIQUIDS

EXCELLENT AGAINST CORROSIVE MEDIA

TECFLUID LU

Range: 3/4″ to 2 1/2″

Precision: ±2 mm (between 0.3 and 2 m )

Maximum temperature: 250ºC.

Principle of operation

ELECTRONIC METER BY ULTRASOUND – TECFLUID LU

Indicador/transmisor ultrasónico para sólidos y líquidos

A transducer emits short pulses of ultrasound towards the surface of a product. The reflection of these pulses is received by the same transducer. Ultrasonic waves travel at the speed of sound. The time that elapses from the emission of the signal until it is reflected on the surface of the product (T1) plus the time until it is received again by the transducer (T2) determines how far away the product is. The calculation of this distance is carried out by means of a microprocessor with a powerful and intelligent software that selects the correct echo level among the echoes produced by the internal elements of the vessels. A temperature detector incorporated in the transducer provides the actual working temperature to the microprocessor, which makes the appropriate calculation corrections for the measured distance. A change of product does not affect the correct functioning of the meter, being unnecessary a new adjustment for each new product. The non-contact level gauge makes installation and maintenance easy.

Indicador/transmisor ultrasónico para sólidos y líquidos

Features

ELECTRONIC METER FOR ULTRASOUND – TECFLUID LU

Accuracy:

± 2 mm (between 0.3 and 2 m)

Materials:

Non-invasive meter, sensor in PP and PVDF

Connection types:

Flange, thread, sanitary connection

Connection sizes:

Según modelo, desde 3/4″ hasta 2 1/2″

Maximum temperature:

250ºC

Maximum pressure:

Depending on the model, from 40 to 3 bar

Accessories:

  • Thermal separator (LTDR series)
  • Converter with remote display

Applications

ELECTRONIC METER FOR ULTRASOUND – TECFLUID LU

  • Level control in storage tanks for chemical and petrochemical products, treated water, wastewater, rain, … and food products
  • Level control in silos with powdery, granular products, …
  • Flow measurement in open channels, in combination with the FLOMAT series electromagnetic sensor (signal processing software not supplied)
  • Thick control of reels of paper, cardboard, steel, plastic, …
  • Level control in intermediate process tanks, with stop-start of pumps and open-close of valves

Downloads

ELECTRONIC METER BY ULTRASOUND – TECFLUID LU

Ask request

1 + 13 =

1