extremely efficient direct control coaxial valve COAX GREENLINE
+34 93 587 22 22 | WhatsApp : +34 628 512 590 grm@grmindustrial.es
Index » Productos » Industrial valves » Coaxial valves » External control » EXTREMELY EFFICIENT DIRECT CONTROL COAXIAL VALVE

EXTREMELY EFFICIENT DIRECT CONTROL COAXIAL VALVE

THREAD / FLANGE

COAX GREENLINE

Orifice: DN 15/40
Pressure: PN100
Connection: Thread / Flanges

extremely efficient direct control coaxial valve

EXTREMELY EFFICIENT DIRECT CONTROL COAXIAL VALVE

THREAD / FLANGE

COAX GREENLINE

Orifice: DN 15/40
Pressure: PN100
Connection: Thread / Flanges

Description

COAXIAL VALVE FOR ENERGY SAVING – COAX GREENLINE

The green line ™ series has been specially developed as a series of energy efficient solenoid valves. For this reason, standard directly controlled valves from müller co-ax have been combined with completely new patented control electronics.

After switching operation, the controller reduces the energy required to keep the control tube to an absolute minimum. Depending on the pressure level, the valves require up to 80% less energy . This fact has very positive results for applications as a consequence of lower energy costs , heat emission and better thermostability. Greenline valves are available in four different delay times for opening and closing.

These delay times can be configured and modified by the customer at any time using a switch in the terminal box. In this way, the valve opens and closes by means of electrical damping and prevents pressure surges . Until now, this was only possible with externally controlled valves.

The valve has an optical position indicator as standard in the terminal box for the “open / closed” position. This position indicator is also available as an electrical signal. Dispense mode is currently in preparation. By means of a set point, for example 4-20 mA, the valve stroke can be infinitely varied and held in position.

Technical characteristics

AUTOMATED HIGH PRESSURE VALVE – COAX VMK / VFK 15

Pressure range:

PN0/100 bar

Orifice:

DN 15/40

Design:

Balanced pressure, spring action

Body:

Brass / Aluminum / Stainless steel / Galvanized steel / Non-ferritic materials / Nickel plated steel / Nickel plated brass

Seat:

Synthetic resin or metal

Seat materials:

PTFE / FPM / CR / EPDM

Maximum working temperature:

160ºC

Nominal voltage:

24 V

Ask request

1 + 15 =

1